Did it arrive
Support asks whether the password reset email reached a customer at Acme. Memtro lists the messages to that address in the last 24 hours and finds one marked bounce at 09:14, so the agent asks the customer for another address.
Mailjet + Memtro
Ask whether an email to a customer was delivered, and how your last Mailjet campaigns did.
Connect Mailjet with your public API key and secret key and Memtro reads campaigns sent and drafted with delivered, opened and clicked counts, individual messages and their status in a time window, statistics by day or campaign, contacts and contact lists. A sub-account key sees only that sub-account. It reads on demand and there is no hourly sync. When asked, and once an administrator has granted the action by name, it can send a single email, write, test, schedule or send a campaign to a whole list, which cannot be recalled, and add, remove or unsubscribe contacts on lists.
In Memtro
What you can do with Mailjet in Memtro
Ask in plain English from chat, your editor, a scheduled job or your own agent. The model picks the right Mailjet tool, reads what it needs, and answers with the source cited.
What it does
- 01Campaign overview with subject, send time, delivered, opened and clicked counts and the open rate
- 02Individual messages in a time window with status, subject and campaign, the recipient only when asked
- 03Sent, opened, clicked, bounced, blocked, spam and unsubscribed counts by day, hour or campaign
- 04Contacts by email or list with last activity, opt-in, spam and unsubscribe state, and contact lists
- 05When asked and granted, sends a single email to up to 20 recipients, and creates, writes and test-sends campaign drafts, then schedules one or sends it now to every subscribed contact on its list, which cannot be recalled and counts toward the send quota
- 06When asked and granted, adds contacts to the account or to lists (they get the list's future campaigns), removes or unsubscribes them, excludes them from campaigns, and creates contact lists
Acts when asked
When you ask it to
These tools change something in Mailjet. The model is told to use them only when you ask for exactly that, and an administrator grants each one by name to the teams that may use it; a personal connection acts only after its owner allows it.
- 01Add a contact to the account's contact list (not to any mailing list)
- 02Create a campaign draft
- 03Send a single email
- 04Send a campaign draft now
- 05Schedule a campaign draft
- 06Cancel a campaign draft's schedule
- 07Send a test of a campaign draft
- 08Write a campaign draft's content (replaces what was there)
- 09Edit a campaign draft's settings
- 10Add a contact to, remove from or unsubscribe from several lists
- 11Add an email to, remove from or unsubscribe from one list
- 12Create a contact list
- 13Update a contact's name or campaign exclusion
Events
When it happens
Turn events on in the connection's Events tab on the Connections page, choose the kinds you want, and Memtro registers its address with Mailjet for you. Each event can start a job, with the event as its input. Mailjet sends a secret with every delivery, and one without it is refused.
Events and webhooks- 01An email was accepted by the recipient's server
- 02An email bounced
- 03An email was blocked
- 04A recipient marked an email as spam
- 05A recipient unsubscribed
- 06A recipient opened an email
- 07A recipient clicked a link
In practice
Ask it like you would a colleague
Once Mailjet is connected, these are the kinds of things people ask. Plain questions, no syntax. If the answer lives partly in another system you have connected, Memtro looks there too.
Mailjet + MemtroWas the invoice email to dan@northwind.example delivered yesterday?
How did our last three newsletters do on opens and clicks?
How many messages bounced or were marked as spam this week?
Is priya@brightwave.example unsubscribed?
Send a test of the March product update draft to me and Laura
Getting the newsletter out
Priya Sharma asks Memtro to send the April newsletter draft to herself as a test, then schedule it for Thursday at nine. Memtro sends the test, and once Priya has checked it schedules the draft, so every subscribed contact on the customers list receives it on Thursday unless the schedule is cancelled first.
Teams
Where it fits
The teams that lean on Mailjet most, a question each of them asks, and what they connect beside it.
- MarketingSpend, leads and reputation in one conversationMarketing lead, Performance marketer, Content and SEO, Brand and community“How did last week's LinkedIn and Google campaigns do, and which leads reached the pipeline?”Used alongside Google Ads, Meta Ads, HubSpot, Google Analytics 4, Brevo and 7 more.
- SalesWalk into every call briefedAccount executive, Account manager, Sales leader, Sales operations“Brief me on BigCo before the 3pm renewal call”Used alongside HubSpot, Help Scout, Xero, Gmail, Google Calendar and 6 more.
- LeadershipOne question across the whole companyFounder, Chief executive, Department head, Board member“What happened with our top ten accounts this week, and is anything at risk?”Used alongside HubSpot, Help Scout, Xero, Stripe, Linear and 6 more.
Better together
Works with
A record in Mailjet is rarely the whole story. Connect the systems that hold the rest and Memtro checks them together, then remembers what it learned so the next question starts further along.
- CRM and salesMailjet with HubSpotContacts, companies, deals and tickets, with the rest of the company's memory attached.
- CRM and salesMailjet with SalesforceAsk your CRM questions in plain English, down to the SOQL.
- CRM and salesMailjet with Twenty CRMObjects, fields and records from the open-source CRM, and records it can create and change when you ask.
- AnalyticsMailjet with Google Analytics 4Ask your traffic questions in plain English and get the numbers back.
- AnalyticsMailjet with Plausible AnalyticsAsk about your website traffic in plain English.
- AnalyticsMailjet with UmamiAsk about your website traffic in plain English, without sending anybody to a dashboard.
- Content and webMailjet with AhrefsBacklinks, rankings and keyword data from Ahrefs, on demand, and tracking set up when asked.
- Content and webMailjet with WordPressYour blog and site content, searchable in Memtro, and edited when asked.
- Content and webMailjet with WebflowSite pages, CMS content, form leads and orders from Webflow.
Also in Marketing automation
Using something else for the same job, or both? Each connector has its own tools; connect as many as you like.
ActiveCampaign- Brevo
- Customer.io
- Marketo Engage
- Account Engagement (Pardot)
- Mailchimp
Klaviyo- beehiiv
- Kit
MailerLite- Campaign Monitor
GetResponse
Instantly
lemlist
Drip- EmailOctopus
Omnisend- Buttondown
Moosend
Smartlead- Formbricks
- listmonk
- Mautic
- Loops
Iterable
Dotdigital
Flodesk
LoyaltyLion
Benchmark Email- Bento
Braze
Sender- SendPulse
- Bitly
Rewardful
Mailshake
SurveySparrow
Retently
Setup
How to connect
Connect withAPI key (public) and Secret key (private)
- 1
In Mailjet open Account Settings → API Keys and copy the primary key's public half
- 2
Click the eye icon next to the Private API key to reveal the secret key. A sub-account key sees only that sub-account
- 3
In Memtro open Connections → Mailjet, paste the API key and the Secret key, and connect
- 4
Ask whether last week's renewal email to Northwind was delivered
Also works from
Chat in the dashboard, the OpenAI-compatible API, scheduled jobs, and any MCP client: Claude Code, OpenCode, Cursor, Claude Desktop. The Mailjet tools are the same everywhere.
FAQ
Questions
Can Memtro change anything in Mailjet?+
Only when you ask, and only what it has been granted: add a contact to the account's contact list (not to any mailing list); create a campaign draft; send a single email; send a campaign draft now; schedule a campaign draft; cancel a campaign draft's schedule; send a test of a campaign draft; write a campaign draft's content (replaces what was there); edit a campaign draft's settings; add a contact to, remove from or unsubscribe from several lists; add an email to, remove from or unsubscribe from one list; create a contact list; update a contact's name or campaign exclusion. Every other tool reads, searches or lists. The Connections page labels the tools that act, an administrator grants each one by name to the teams that may use it, and a personal connection acts only after its owner allows it.
Who can use a Mailjet connection?+
A personal connection serves only your own requests. A shared connection serves the organisation: everyone, or only the teams an admin chooses. Admins can always add shared connections; other members need the permission.
Does Memtro store my Mailjet data?+
Credentials are encrypted at rest. Tool results are cached briefly so agent loops do not repeat identical calls, and the facts the model extracts are saved to your organisation's memory with provenance (system, record and link) so they can be checked and superseded.
How do I connect Mailjet?+
API key (public) and Secret key (private). In Mailjet open Account Settings → API Keys and copy the primary key's public half.
Can Mailjet start a job?+
Yes. Turn events on in the connection's Events tab on the Connections page, choose the kinds you want, and Memtro registers its address with Mailjet for you. A job set to start "When an event arrives" then runs once for each matching event, with the event as its input. The run treats the event as outside data, never as instructions, and anything the run remembers is kept as unverified.
Connect Mailjet in a few minutes
Seven-day free trial, then one monthly price per organisation. Connectors, jobs and memory are never metered.